Phone: 0121 663 1388
Waste oil heater burner blow air heating 30 kW
Heater burner is used for fast and economical heating of industrial premises in which the lack of any sources of heat. The device can be used for industrial halls, car services, business premises, technical premises, etc.

TYPES OF FUEL USED TO FURNACE COMBUSTION:
Contaminated fuel oil
diesel oil,
rapeseed (recommended) vegetable oils,
motor oils (worn)
Hydraulic oil (worn)
gear box oils (worn)
Transformer Oils (worn)
Each oil that is liquid and burns
Do not use combustion of gasoline, solvents, paint, tar and volatile fuels.
For burning oils you must apply individually for concessions at their disposal.

Our company has many years of experience in the production of this type of blast furnaces. In the production we use a lot of innovation and modernization. Increased quality of performance of individual components such as:
Bold bowl from 3mm to 5mm
The catalyst steel 12.5 mm with extended usability
The lower cylinder of 4 mm steel
Extrusion cylinder bottom of the combustion chamber
Sculpted horizontal surface inside the furnace protects against bending
Sealed cover the top of the cylinder
The distance of the lower fan
Protection against overheating of the lower engine
Robust housing made of galvanized steel
The exhaust outlet 150 adapted for pipes
Characteristic of device
Smooth temperature control
Housing made of galvanized steel
Cast iron fireplace with a new catalyst boiler steel
Quiet work
1 year warranty
Directed heated air outlet
Manual Ignition
A heated-air temperature 40-70 ° C
Ability to use water heat exchanger from our offer
Cheap exploitation

SPECIFICATIONS:
Thermal power - 30kW
heated area - 1400 m3
oil consumption - from 2L to 4L / 1h
Weight - 85kg
Dimensions - height 120 cm, width 60 cm, Down. 60 cm.
Temperature control - Manual
exhaust outlet - About 150
power supply fan - 230 V
Power consumption - 35W-110W
current type - volatile
oil tank - 20 L
fan power blowing 2300m / 3 / h
If collection then 50 pound cheaper